Slicer-free · G-code
Saytra — vase & lampshade G-code generator
Design a vase or lampshade and export ready-to-print G-code — no slicer needed. Sculpt the spine, shape the cross-section, tune speed and nozzle, and preview live in 3D.
Start from
Spine (silhouette)
Drag points to sculpt · double-click empty space to add · double-click a point to remove
Height120 mm
Cross-section & shape
Cross-section
Sides / points6
Shape depth0%
Twist0 °/mm
Vertical waves0
Wave depth0%
Non-planar texture
The nozzle rises and dips as it spirals, weaving a raised pattern.
Style
Height (amplitude)2 mm
Peaks per turn14
Slow-down at peak40 %
The nozzle slows at each peak so the raised strand cools before it descends. Switch the preview to Toolpath to see the up-and-down motion.
Print settings
Nozzle diameter0.4 mm
Wall width0.45 mm
Layer height0.3 mm
Flow100 %
Print speed40 mm/s
First layer speed20 mm/s
Max / travel speed120 mm/s
Filament diameter1.75 mm
Nozzle temp210 °C
Bed temp60 °C
Fan100 %
Segments / rev200
Base layers4
Purge length40 mm
3D preview
Preview is representative; the exported file uses the full resolution you selected.
Estimates
Height120 mm
Layers400
Est. time51 min
Filament6.61 m
Weight20 g
Wall0.45 mm
Output is single-wall “vase mode” G-code. Always sanity-check the first layer and temperatures for your printer before running unattended.